Futaba 10CG 2.4 GHz FASST Airplane Radio System w/R6014HS

Ex Tax: $509.00
Brand: Futaba
Product Code: TOYS
Availability: In Stock
Tags: TOYS

This is the Futaba 10CG 2.4 GHz FASST Airplane Radio System with R6014HS Receiver. The 10CG is perfect for the price-conscious pilot — an integrated, 2.4GHz treasure trove of features formerly found only on the most advanced Futaba systems.

it’s also a system that boasts advantages few others can claim: 7-point throttle and pitch curves; 4 heli flight modes; a round dozen factory-defined glider mixes; graphics for programming swash plate types; swash ring; and logic switches that allow you to activate a timer or other function just by changing the positions of specific sticks or switches.
The benefits of FASST are built-in!

10CG System Overview:

  • Dial ‘n Key™ programming w/joystick
  • Airplane, heli and glider software
  • 2048 resolution
  • Real-Time Response™
  • Smart Switch Technology™
  • Basic & advanced menus
  • 15-model memory, expandable to 48 models*
  • 10-character model & user naming
  • Assignable switches & dials/functions
  • Model select, copy, re-set
  • Data transfer
  • 2 proportional slider switches
  • Fail-safe, sub-trims, servo reversing & EPA
  • Digital trims & trim step, expo & dual/triple rates
  • 160 x 72 backlit LCD w/adjustable contrast
  • Servo monitor display
  • Auxiliary channel screen for 1-step function/switch assignment
  • Model & system timers
  • Full functionality trainer system (cord required)
  • Throttle cut, hold & idle down
  • Mode 1-4 selectable
  • Sticks w/length and tension adjustments

* Requires optional 128K CAMPac Module (FUTM9408)

R6014HS ReceiverR6014FS Receiver

  • True, 14-channel design.
  • Designed specifically for FASST™ 2.4GHz systems.
  • Push-button Easy-Link™ feature locks receiver to the transmitter’s unique signal.
  • Includes battery fail-safe with auto cut-off and setup LED.

Airplane Features

  • 8 programmable mixes
  • Elevator/Flap
  • Throttle needle
  • Aileron differential
  • Flaperons
  • V-tail
  • Elevon
  • Air brake w/elevator delay
  • Ailevator
  • 4-position snap roll switch
  • 2 independent gyro settings
  • 7-point throttle curve
  • Flap trim


  • Futaba 10CG Transmitter (NT8S700B)
  • 9.6V 700mAh NiCd Transmitter Battery (FUTM1460)
  • NR-4J 600mAh NiCd Receiver Battery (FUTM1280)
  • FBC-19B RX/TX Wall Charger (FUTM1830)
  • R6014HS Receiver (FUTL7645)
  • 8" (203mm) Servo Extension
  • Switch Harness
  • Neck Strap (FUTM5690)


  • Servos depending on type of aircraft 

Transmitter Specifications:
Power Supply: 9.6V NT8S700B NiCd battery

Receiver Specifications:
Receiving Frequency: 2.4GHz
Power Requirement: 4.8-6V
Current Drain: 70mA
Size: 2.06x1.48x0.63" (52.3x37.5x16.0mm)
Weight: 0.72oz (20.8g)

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: